自上料攪拌車的攪拌軸不轉的原因
在生產過程中當自上料攪拌車上下來時，攪拌軸停止轉動或轉動有點慢是正常現象，如果這種情況先停止檢查，看是否有以下三種情況。
In the production process, when getting off from the loading mixer, it is normal for the mixing shaft to stop rotating or rotate a little slowly. If this situation occurs, stop the inspection first to see if there are the following three situations.
1. 電機驅動皮帶松了嗎?
1. Is the motor drive belt loose?
自拌混凝土攪拌車的電機驅動皮帶過松，也會導致商品混凝土攪拌車攪拌軸轉動緩慢或停止轉動，電機驅動皮帶過松，導致功率傳遞不足。
The motor drive belt of the self mixing concrete mixer is too loose, which will also cause the mixing shaft of the commercial concrete mixer to rotate slowly or stop rotating, and the motor drive belt is too loose, resulting in insufficient power transmission.
2. 是否有嚴重超載?
2. Is there serious overload?
自拌混凝土攪拌器的攪拌軸超過正常工作負荷時，攪拌軸轉動緩慢。如果負荷過大，會導致攪拌軸停止或攪拌軸彎曲。
When the mixing shaft of self mixing concrete mixer exceeds the normal working load, the mixing shaft rotates slowly. If the load is too large, it will cause the mixing shaft to stop or bend.
3.攪拌葉片或側葉片與管內壁之間是否有較大的異物?
3. Is there any large foreign matter between the mixing blade or side blade and the inner wall of the tube?
這種情況也會使混凝土攪拌車自動送料攪拌車的攪拌軸停止轉動或轉動緩慢。攪拌槳葉或側槳葉與罐體內壁之間有較大的異物，也會導致攪拌軸停止。攪拌葉片或側葉片與罐體內壁之間的間隙過大，尤其是卵石，是導致異物堵塞的原因。
In this case, the mixing shaft of the automatic feeding mixer of the concrete mixer stops rotating or rotates slowly. There are large foreign matters between the mixing blade or side blade and the inner wall of the tank body, which will also cause the mixing shaft to stop. The excessive gap between the mixing blade or side blade and the inner wall of the tank, especially the pebble, is the cause of the blockage of foreign matters.
以上文章由中科自上料攪拌車公司小編整理，如果您想了解更多關于中科聚峰廠家的相關信息，請關注本網站http://m.bflrsn.cn。
The above articles are compiled and sorted out by the company. If you want to know more about the manufacturer of Zhongke Jufeng, please pay attention to this website http://m.bflrsn.cn 。
