如何處理混凝土自上料攪拌車的粘度過高？
我們在使用混凝土自動攪拌的過程中，可能會遇到粘度太高這個問題，那么我們應該如何處理呢？混凝土自上料攪拌車廠家為您解答：
In the process of using automatic concrete mixing, we may encounter the problem of too high viscosity, so how should we deal with it? The manufacturer of concrete self-feeding mixer truck will answer for you:
潤滑油粘度過低，它的潤滑效果就會降低，這樣就會增加了混凝土自上料攪拌車部件在運行過程中的摩擦力，使減速機運行時克服了摩擦功，同時也會產生大量的熱量，讓減速機溫度升高。
If the viscosity of lubricating oil is too low, its lubricating effect will be reduced, which will increase the friction force of the parts of the concrete self-feeding mixer during the operation, so that the friction work can be overcome during the operation of the reducer, and at the same time, a large amount of heat will be generated, which will increase the temperature of the reducer.
如果是混凝土自上料攪拌車機粘度過高的話，就會增加設備的承載力、摩擦力，從而產生巨大的熱量。
If the viscosity of the concrete self-feeding mixer is too high, it will increase the bearing capacity and friction of the equipment, thus generating huge heat.
我們需要準備好緊急驅動軟管，將故障混凝土攪拌車熄火，卸下液壓馬達上的高壓油管接頭。將救援車熄火，將其液壓馬達的高壓油管卸下，并與故障車上的對應接頭用緊急驅動軟管相連。
We need to prepare the emergency drive hose, turn off the faulty concrete mixer, and remove the high-pressure oil pipe connector on the hydraulic motor. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding connector on the faulty vehicle with the emergency drive hose.
發動救援車，將其操縱手柄撥至出料位置，故障車內的混凝土即被排出。緊急驅動完畢后，將驅動軟管卸下，并恢復兩車原狀。在托輪和滾道之間放入木楔，以控制攪拌筒的旋轉，要注意安全。
Start the rescue vehicle, move its control handle to the discharge position, and the concrete in the fault vehicle will be discharged. After the emergency drive is completed, remove the drive hose and restore the two vehicles to their original state. Put a wooden wedge between the supporting roller and the raceway to control the rotation of the mixing drum. Pay attention to safety.
選購時，對廠家的技術能力和售后服務能力進行核實。一般通過電話溝通和光顧廠家網站都能有個大致的了解，售后服務及時周到的廠家，才不會給用戶帶來麻煩或影響生產。
When purchasing, verify the technical capability and after-sales service capability of the manufacturer. Generally, we can have a general understanding through telephone communication and visiting the manufacturer's website. Only the manufacturer with timely and considerate after-sales service will not cause users trouble or affect production.
如果大家還有什么不明白的地方大家可以向小編http://m.bflrsn.cn進行咨詢，小編會及時的為大家進行講解與解答相關知識。
If there is anything you don't understand, you can ask Xiaobian http://m.bflrsn.cn For consultation, the editor will explain and answer relevant knowledge for you in a timely manner.
下一篇：自上料攪拌車如何行駛工作？上一篇：全自動攪拌車在注入油前需要注意的動作
